Sealer's Selection® Gold – Rapid Cure is apremiumform, high performance penetrating / impregnating stone, tile & grout sealer. It is a low VOC,h2o-based sealer formulated to provide maximum stain protection, especially in food preparation and serving areas. Ideal for all interior and outside natural stone (including around salt water swimming pools), tile & grout surfaces. This premium sealer also includes built-in Microban® – Cured Sealant is Mould & Mildew Resistant,and this sealerlasts upwardly to 15 years.
Cardinal Features:
Maximum stain protection
May exist used as a pre-grouting sealer
Allows wet vapour transmission
The NEW Rapid Cure Formula protects in less than 4 hours
Now with built-in Microban® – Cured Sealant is Mould & Mildew Resistant
Rubber to use, water-based low VOC formula
Does non alter the sideslip resistance of the sealed surface
Designed to reach optimal penetration into dense, low-porosity surfaces
Last up to 15 years
Suitable for use:
As a natural look sealer for all natural stone surfaces (such as sandstone, slate, quartz, marble, limestone, granite, bluestone / basalt) unglazed tiles, polished & unpolished porcelain tiles, clay pavers, polished & unpolished physical, terrazzo, brick, grout, masonry, encaustic tiles, terracotta and grout. Suitable for both interior and exterior apply.
Limitations:
Do non allow sealer to come in contact with any non-recommended surface.
If the product is allowed to dry on the surface, a white pic may form. If this occurs, scrub with Aqua Mix® NanoScrub® and a white nylon pad.
The sealer will not prevent surface wear or etching from acids or caustic chemicals.
Surface Grooming
The surface should be dry, clean and complimentary of waxes, sealers or finishes. New installations need to exist dry 24 hours before application. Protect surrounding surfaces. Exam production in an inconspicuous area to ensure desirable results. The Stone, Tile or Grout must exist dry prior to applying sealer – the following document explains in detail the definition of the term "dry out" every bit it relates to sealer application. READ More than
Pre-Grout Sealer / Grout Release:
Porous tile and stone can be stained by grout during installation. Sealing the tile before grouting volition make grout removal much easier. Apply sealer co-ordinate to directions after the tile has been bonded for a minimum of 24 hours, or apply to the front face of tile before installation. Wait a minimum of 2 hours before grouting.
Procedure
Always test a small area first to ensure satisfactory results.
Apply using a pump sprayer, paint pad applicator, lambswool applicator, sponge or brush.
Permit it to penetrate for upward to 5 minutes, if the surface is drying within 5 minutes, utilise more sealer to keep surface wet for up to 5 minutes.
Wipe surface completely dry using clean, dry cotton wool, newspaper or microfiber towels afterwards each application. Ensure no sealer is allowed to dry on the surface.
Porous surfaces may require additional applications.
Conduct a test to see if the surface is completely sealed later 2 hours by applying drops of water on the surface. If it penetrates, an additional application is required.
Drying Time
Let 30 minutes of drying time between applications when conditions are 20° Celsius and 70% RH.
If temperatures are lower or humidity higher than these times may be longer.
If unsure nigh the specific task site temperatures and atmospheric condition please contact 1 of our technical advisors.
Ready for surface traffic in a minimum of 2 hours.
Keep dry for a minimum of 12 hours.
Achieves a full cure in a minimum of 24 hours.
Clean-Up
Clean tools with mineral spirits after employ
Product Information Sheets:
VOC Content:
Maximum VOCs: <70 grams per litre
Bachelor in:
473ml, 946ml, 3.8L, 18.9L
Where to Buy
Product Maintenance:
Routine Cleaning:
Regurlar cleaning should consist of a regular mop or light scrub with a pH neutral detergent, or Aqua Mix Concentrated Stone & Tile Cleaner at a dilution rate of 1 function product to fourscore parts water. Using this product on a regular basis will safely remove soiling and assist prevent a stubborn build upwards without dissentious the tile, grout or sealer. This product is a pH Neutral formula and volition not harm any other water-safe surfaces.
Heavy-Duty/Periodic Cleaning (residential):
Pre-moisture the flooring with Aqua Mix Stone Deep Make clean or Aqua Mix Heavy-Duty Tile & Grout Cleaner at a dilution of half-dozen:1, permit the surface to soak for 3-five minutes keeping wet.
Then arouse the floor using either an Aqua Mix AquaScrub or rotary floor scrubbing motorcar.
Excerpt liquid off of the floor using either a microfiber mop or a moisture vacuum cleaner fitted with a squeegee caput.
Rinse thoroughly with make clean potable water. Mop up rinse water off the flooring.
Sealer Reapplication: Thoroughly clean the surface using the periodic cleaning method, so reapply sealer following awarding instructions as per label. No stripping will be required for reapplication. Delight review specific sealer data sheets for recommended reapplication menses.
Aqua Mix Sealers Notes: All spills should exist wiped upwardly immediately to reduce the chances of absorption. It is important that no acidic cleaners or products that contain solvents are used on sealed natural stone.
0 Response to "Custom Building Products Aqua Mix Sealers Choice Gold Reviews"
Post a Comment